Create your profile by entering your device
hardware address (mac address) and device type.
Once you have done the above, follow the steps below :-
You must first determine what IP address your linksys device was assigned. You need to pick up the phone attached to the Line 1 jack and dial:
**** (four asterisks)
then dial: 110 #
and you will be told the IP address of your device (e.g. 192.168.1.100)
Please go to any browser on your computer which is on your network and enter the address:
(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1.
example by typing http://192.168.1.100
Please login as admin in advance mode and find the provisioning tab.
Please do the following :-
Provision Enable equal to Yes
Resync on Reset equal to Yes
Profile Rule equal to http://220.127.116.11/SIPUpdates/Profiles/$MA.cfg